Borg Warner Turbos K27 replacement for the Holset HX35W turbocharger.
Borg Warner Turbos K27 turbocharger is capable of supporting diesel trucks up to 450HP. Featuring a 60/83.7mm Forged Milled Wheel (FMW). The 7/7-blade compressor is made to resist low- and high-cycle fatigue. The 70/58.83mm 12 blade Inconel turbine is made for quick response. The turbine wastegate housing is a twin-volute, and an adjustable wastegate actuator is preset at 26 PSI (325hp), which is safe up to 40PSI (450hp) with a Power Driven Diesel Turbo Tuner. Like the Holset, the oil inlet is a threaded M12 and the oil drain is threaded M8.
1998.5-2002.5 Cummins with an HX35W turbocharger, A Cummins 3927811 cast elbow, and a 3903652 v-clamp is needed to use your current downpipe.
1998.5-2002.5 Cummins with an HY35W, A Cummins 3927811 cast elbow, and a 3903652 v-clamp is needed to use your current downpipe. Replacement of the two studs installed into the original turbine inlet flange will also be needed
2003-2007.5 Cummins with either an HY35W, HE351W, or HE351CW a fabricated or adaptor for the compressor discharge and for the turbine discharge are necessary. With a HE351CW turbocharger, a boost fooler, or resistor is also necessary.
Compatible With:
- 1989 Dodge 5.9L 12V Cummins
- 1990 Dodge 5.9L 12V Cummins
- 1991 Dodge 5.9L 12V Cummins
- 1992 Dodge 5.9L 12V Cummins
- 1993 Dodge 5.9L 12V Cummins
- 1994 Dodge 5.9L 12V Cummins
- 1995 Dodge 5.9L 12V Cummins
- 1996 Dodge 5.9L 12V Cummins
- 1997 Dodge 5.9L 12V Cummins
- 1998 Dodge 5.9L 12V Cummins
- 1998.5 Dodge 5.9L 24V Cummins
- 1999 Dodge 5.9L 24V Cummins
- 2000 Dodge 5.9L 24V Cummins
- 2001 Dodge 5.9L 24V Cummins
- 2002 Dodge 5.9L 24V Cummins
*May not work for all builds due to other engine/vehicle modifications
Frequently bought with:
Dodge \ Ram Diesel
Power Driven 10 AN Block Oil Drain Fitting 89-07 Dodge Cummins
Check out the the PDD Youtube for anything and everything diesel performance!
Reviews
There are no reviews yet.