Power Driven NP241 T-Case 29 Spline Input Shaft

The NP241 T-Case 29 Spline Input Shaft for transfer cases for 1994 through 2002 Dodge RAM Trucks, is required when using a manual transmission (NV4500/NV5600) or when upgrading to a fat 29 spline billet output shaft in Dodge 47RE and 48RE transmissions. When using this shaft with a billet 29 spline automatic transmission, it must be shortened to 0.875″ to accommodate the length requirements of an automatic transmission.

This is recommended for 1,000 hp race trucks and sled pullers that regularly break the standard-sized 23 spline billet transmission output shafts and need the strength of a 29 spline transfer case input shaft.

Note: There are 2 versions of this transfer case input shaft, one for 16 mm (narrow bearing), and a separate model for 24 mm (wide bearing).

Wide bearing NP241 assembly numbers:  52098503, 52098504, 52098512, 52098534, 52098675, 52098676, 52098677, 52098678, 52099035, 52099036, 52099041, 52105091, 52105023AB, 52105024AB, 52105024AC, 52105024AD, 52105025AB, 52105025AC, 52105025AD, 52105026AB, 52105027AB, 52105027AC, 52105027AD, 52105028AB, 52105028AC, 52105028AD

Narrow bearing NP241 assembly numbers: 52105023, 52105024, 52105025, 52105026, 52105027, 52105028, 52105092, 52105314, 52105335, 52105335, 52105336, 52105368, 52105370, 52105513

 

The Power Driven Diesel NP241 T-Case 29 Spline Input Shaft is compatible with:

 

*May not work for all builds due to other engine/vehicle modifications