aFe 46-21062-B 94-02 Cummins BladeRunner Intercooler Upgrade Kit

This BladeRunner Street Series Intercooler Kit represents the next generation of intercoolers. BladeRunner Intercoolers utilize a 2-1/2″ bar-and-plate core design that is larger than stock. This kit outflows the OE intercooler system by 10%!

End Tanks: The unique BladeRunner end tanks are constructed from cast 356-T6 aluminum that incorporate 3 multi-directional vanes.

Multi-Directional Vane Technology: The BladeRunner MDV technology is used to direct hot airflow through the entire intercooler core, which allows for greater cooling than competitor units.

2-1/2″ Bar-and-Plate Core Design: The bar-and-plate core design allows for greater airflow and increased heat dissipation over the much-smaller tube-and-fin design used by the OEM. This intercooler also features 3-5/8″ inlet/outlet connections compatible with stock intercooler tubes. This intercooler outflows OE-style tube-and-fin core designs by 10%!

TIG Welded: 100% TIG welded by certified craftsmen for strength and durability. TIG welding provides the strongest welds while reducing stress cracks.

Pressure Tested: The BladeRunner Intercooler is test pressure rated at 100 psi.

Flow and Performance: The intercooler tubes are constructed of 3″ mandrel-bent aluminum tubing for maximum flow, then powder coated wrinkle black for heat and corrosion resistance. The smooth mandrel bends allow for low turbulence, increasing horsepower and torque, and lowering EGTs.

aFe Badging: A unique aluminum laser-cut aFe POWER logo plate is welded on for an aggressive style.

Installation Is a Snap: Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes constant-tension spring-loaded T-bolt clamps for a leak-free seal and 5-ply heavy-duty couplings for strength.

Features:

• Outflows the stock intercooler with tubes and increases heat dissipation
• Constructed out of cast 356-T6 aluminum
• Incorporates multi-directional vane (MDV) technology to direct hot airflow through the intercooler core
• 2-1/2″ bar-and-plate core design that is 25% larger than stock
• This intercooler is 100% TIG welded by certified craftsmen for strength and durability
• Intercooler is test pressure rated at 100 psi
• 3″ hot-side and cold-side mandrel-bent aluminum tubes
• Powder coated wrinkle black for heat resistance
• Coupler hose allows for expansion, movement, and vibration between 2 hard pipes
• Includes high-quality 5-ply reinforced silicone couplings and stainless-steel spring-loaded T-bolt clamps for secure installation
• Uses all factory mounting locations and includes all necessary hardware for a hassle-free installation